密码锁详细说明 coded lock Detailed
instructions
一.功能特点（Features）:
1.
声音提示功能（voice prompts）：
操作电子柜锁时有不同的声音提示
When operating the electronic cabinet lock has
a different voice prompts
2.
灯光提示功能（light prompts）：
三种颜色的灯光提示(黄色灯代表报警,红色灯代表低压,绿色灯代表开锁)
Tip three colors of light (yellow light on
behalf of the police, on behalf of low red
light, green light on behalf of
unlocking)
3. 应急开门功能（emergency door
features）：
1)在内部没电或电池电压不足驱动电机的情况下，可用外接电源供电开锁；
in-house without electricity or battery-voltage-driven motor in the case, can
unlock
the external power supply;
2)当用户遗忘密码时，可使用管理密码或跳码开锁；
When the user
forgets the password, you can use the admin password or unlock
codehopping;
4. 低压报警功能（low-voltage alarm
function）：
在电压过低时，输入密码开锁后红灯闪烁并伴有四组群声报警，在低压报警后
可开锁100次左右. 建议您尽快更换电池。
When the voltage is too low, enter the
password lock and accompanied by four flashing
red light after the groups
sound the alarm, the alarm can lock in low pressure about 100
times. We
recommend that you replace the batteries as soon as possible.
5. 密码位数（digit
password）:
用户密码和管理密码为4-10位，软件跳码固定为10位数
User and admin
password of 4-10 bits, software-digit jump code is fixed at 10
6.密码恢复（Password
Recovery）:
1）当用户遗忘密码时,使用管理密码即可完成开锁同时将用户密码恢复为出厂密码；
When the user forgets the password, use the admin password to unlock the same
time to
complete the user password to the factory password;
2）当管理密码遗忘时，长按主板上的复位开关三秒即可将管理密码恢复为出厂管理码。
When the administration password is
forgotten, long press on the motherboard reset
switch three seconds to
the management password to the factory management code.
7.
多级密码管理（Multi-level password management）：
用户密码、管理密码和跳码分级管理,用户密码和管理密码都可以根据客户需求自行修改.
User password, manage passwords and code
hopping hierarchical management,
user and adminpassword can modify according
to customer needs.
8.密码保护功能（Password
protection）:
当密码输入错误，黄灯闪烁四次同时蜂鸣四声，如果连续输入三次错误密码，
柜锁主板被锁定5分钟,此时操作按键无反应，可有效的防止恶意窃取密码.
When the password input error, the yellow
light flashing four beep tones at the same
time, if the continuous input the wrong
password three times, the motherboard is locked
cabinet lock 5 Minutes, and
the operation buttons no response, can effectively prevent
malicious
theft of passwords.
9.
模式切换功能（Mode switching function
独立式与开放式可通过管理密码进行切换。
Stand-alone with an open switch can manage the
password.
10.
状态提示功能（state prompts ）
在开放式模式下，可以设置在关锁状态下经灯闪烁，提示柜锁己被使用
（证明此柜锁己经有人占用，此功能公适用于开放放模 式，应用于公共场所）
In open mode, the lock can be set in the off
state by light flashes, indicating cabinet
locks have been used (to prove
this cabinet locks have been Occupation, this feature
applies to open up the public mode, used in
public places)
11. 乱码功能
（可选择户用乱码功能，产品出厂前未启动）
开锁密码可随意输入，只要连续输入（比如正确密码是1234，你可以
输入
或6，也可以都可以开锁）包含有正确密码就可以开锁，
有效防止他人旁观窃取密码。
从开始输入正确密码到结束（含随机乱码），不可超过20位，否则系统提示错误。
Unlock password can be free to enter, as long
as continuous input (such as the correct
password is 1234, you can enter or
6, you can 36,235,123,435,962
can unlock) contains the correct
password can unlock, prevent others On the sidelines to
steal passwords.
Enter the correct password from the beginning to the end (with
random
garbage), not more than 20, otherwise the system prompts an
error.
12.
可选功能（Optional features）
使用PDA数据采集器可以查看近开锁的（200条开以内）记录，（包括开锁时间、
开锁密码,身份），采集数据完毕后，可以在软件上或手持机上读
Data acquisition using a PDA can view recently
unlocked (open less than 200) records
(including time lock, unlock password,
identity), After collecting data, software or can
be read on handheld devices
工作温度:-25 ~ +60
Operating Temperature: -25 ~ +60
工作湿度:5%RH~ 95%RH
Operating Humidity: 5% RH
~ 95% RH
静态电流：指示灯熄灭时静态电流:5uA
Quiescent Current: indicator is off quiescent
current: 5uA
启动时瞬间（开锁时）电流：250mA
instant start (Unlock) Current:
250mA
操作按键的工作电流：20mA
operation key operating
current: 20mA
电池寿命:正常情况下,开门20000次，12个月以上,欠压报警后仍可开门100次左右
Battery Life: Under normal circumstances, open
the door> 20,000